Thermo Design Total

"PARVA COMFORT"

"KAPPA"

"PARVA CONDENSING"

"BIASI SUPER KAPPA"

Model "SOLIDA"

• FLOOR STANDING HEAT GENERATOR HIGH EFFICIENCY
• UPPER 90% SUITABLE FOR LIQUID FUEL OR GAS HOT
• WATER PRODUCTION FOR CENTRAL HEATING
  
  

OUR STRONG POINTS:

• High efficiency floor-standing generator fitted for jet burners on
• liquid and/or gas fuel, with partial flame reversal and one flue
• pass, cooled combustion chamber, for the production of hot
•  water for central heating.
  - G20 cast-iron boiler body made from pre-assembled
• elements (2-8) with steel cone inserts and boiler studs, insulated
• by a layer of rock wool lined by special tear-proof material.
  - Steel casing painted by anaphoresis using epoxy powder paint
• and furnace-baked at 180°C.
  - Supplied as one single package in a wooden crate.
  - Design with elegant and refined appearance.
• ADVANTAGES OF THE GN1 N:
• - Sturdy exchanger with high thermal performance.
  - Path of the flue gas that allows simple and silent operation.
  - Cleaning and maintenance simplified by the possibility of
• accessing the boiler from the front.
  - Very high efficiency and consequently reduced consumption
•  and low operating costs.

• MODEL C : NATURAL DRAUGHT, OPEN FLUE
• MODEL F : FORCED DRAUGHT, ROOM SEALED
• OUR STRONG POINTS:
  
  - Wall - hung atmospheric boiler with traditional combustion.
  - Instant production of domestic hot water.
  - Electronic flame modulation in both central heating and domestic hot water mode.
  - Analogue control panel with signal LED.
• ADVANTAGES OF THE DOMIproject:
  
  - Extremely compact dimensions.
  - ECO/Comfort function in domestic hot water mode.
  - Efficiency certification according to 92/42 EEC(forced draught room-sealed models).
  - Also suitable for outdoor installation in partially sheltered places down to temperatures of -5°C.
  
  

• OUR STRONG POINTS
  
  - Wall-hung atmospheric boiler with traditional combustion.
  - Compact heat exchanger made completely from copper
• (FERROLI patent)
  - Large multifunction backlit graphic display for easy and
• correct setting of the parameters.
  - The DOMITECH boilers are fitted with an antifreeze device
• on the central heating circuit.
  - Instant production of domestic hot water.
  - The DOMITECH boilers can be connected to any type of
• room thermostat, timer thermostat and to an external probe.
  - Electronic flame modulation in both central heating and
• domestic hot water mode.
  - Fitted for solar system.

• ADVANTAGES OF THE DOMITECH
  
  - Site of installation: F models: outdoor installation in partially
• sheltered places down to -5°C as standard and down to-15°C
• using the optional frost protection heater kit.
  - Modulating heat input for both central heating and DHW
• operation, managed by the electronic board with
• microprocessor.
  - Maximum reliability and safety.
  - Extremely compact dimensions.
  - ECO/Comfort function in domestic hot water mode.
  - 3 star efficiency certification according to 92/42 EEC
• (forced draught room-sealed models).
  - Available in the LPG version.
  

• OUR STRONG POINTS:
• - High efficiency floor-standing heat generator fitted for jet
• burners on liquid and/or gas flue, with partial flame reversal
• and one flue pass, cooled combustion chamber, for the
• production of hot water for central heating and DHW.
  - Quick storage cylinder (100 litres), steel with cryolite glass
• finish, insulated by a layer of polyurethane foam, with
• immersed coil.
  - Pump for the storage cylinder coil and central heating pump.
  - G20 cast-iron boiler body made from pre-assembled
• elements with
•  steel cone inserts and boiler studs, insulated by a layer of
• rock wool lined by special tear-proof material.
  - Steel casing painted by anaphoresis using epoxy powder
• paint and furnace-baked at 180°C.
  - Supplied as one single package in a wooden crate.
  - Elegant and refined design.
• ADVANTAGES OF THE GN1K N:
• - Sturdy heat exchanger with high thermal performance that
• guarantees very high efficiency and consequently reduced
• consumption and low operating costs.
  - Cleaning and maintenance simplified by the possibility of
• accessing the boiler from the front.
  

• OUR STRONG POINTS:
• - High efficiency floor-standing generator fitted for jet burners
• on liquid and/or gas flue, with partial flame reversal and one
• flue pass, cooled combustion chamber, for the production of
• hot water for central heating.
  - G20 cast-iron boiler body made from pre-assembled
• elements (6-14) with steel cone inserts and boiler studs,
• insulated by a layer of rock wool lined by special tear-proof
• material.
  - Steel casing painted by anaphoresis using epoxy powder
• and furnace-baked at 180° C.
  - Supplied in 3 boxes:
  1-boiler body in a wooden crate
  2-casing packaged in a cardboard box
  3-instrument panel packaged in a cardboard box
  - Modern and elegant lines.
• ADVANTAGESOF THE GN2 N:
• - Path of the flue gas that allows simple and silent operation.
  - Cleaning and maintenance simplified by the possibility of
• accessing the boiler from the front.
  - Very high efficiency and consequently reduced consumption
• and low operating costs.
  - Fitted for two-stage burners.
  - Wired for control unit.

• OUR STRONG POINTS:
• - High efficiency generator on liquid or gas flue, with three
• flue passes, cooled combustion chamber, for the production of
• hot water for central heating, suitable for operation either
• connected to a traditional system or connected to a low
• temperature heating system, with a minimum return
• temperature of 35°C.
  - G20 cast-iron boiler body made up of elements to be
• assembled when installing the generator in the heating
• system.
  - Steel casing painted grey by anaphoresis using epoxy
• powder paint.
  - Modern and elegant lines.
• ADVANTAGES OF THE GN4 N:
• - High efficiency achieved by the combination of high
• technology and maximum constructional rationality.
  - Special layout of the cast-iron body, and additional
• attachment,that allows the boiler to be connected in two
• different ways,according to the traditional system or
• alternatively to a low temperature heating system.
  - Fitted for two-stage burners.
  - Wired for control unit.
  

• The project DIVATOP 60 was designed to satisfy the users
• who need hot water in large quantities and short waiting
• times . With the large accumulation of stainless steel
• AISI316 60 liter , insulated with high insulation material ,
• is able to meet simultaneous demands of hot water for
• more sampling points . The efficiency of DIVAtop
• disponibileper 60 is the highest in its category . It is
• certified 3- star status by the Directive 92/42 EEC for
• the classification efficiency ( only mod. F) according to
• EN 13203 for medical facilities .
• Even outside in place partially protected down to -10C.

• OUR STRENGTHS :
• Builder of high performance floor-standing gas fuel with the
• combustion chamber semibagnata for hot water heating
•  Body in cast iron G20 and items packaged with cones and
• rods of steel, insulated with a layer of glass wool covered with
• tear-proof material
• painted steel casing for anaphoresis epoxy and baking
• at 180 ° C
• Supplied in a single package contained in wooden packing
• Management of any outdoor kettle
• Burner air inlet 2 steel ramps to low NOx
  
  ADVANTAGES OF PEGASUS LN D :
• Available with pump and tank with optional kit
• Certification of energy efficiency second 3 stars 92/42 ECC
• Operation temperaura sliding external probe (optional )
• Controls buttons and LCD interface
• Maintenance and cleaning easier by access to the boiler front
• Earnings from which very high fuel consumption and low
• running costs
• Linking with cronocomando remote (optional )
• Antifreeze system
• Operates on LPG using a special conversion kit to be
• purchased when ordering

• OUR STRENGTHS :
• Boiler body made of cast iron G20 with pre-assembled
• elements , isolated by a layer of glass wool covered with
• ceramic fiber cloth tear Burner air intake ramps for steel ,
• electric ignition and intermittent pilot flame safety device
• detection by the presence of flame
• Low NOx and CO
• Heat input variable, with two-stage operation ( except mod . 56)
• Collector wind - fumes device rompitiraggio semincorporato
• white painted steel casing for anaphoresis epoxy
• ADVANTAGES OF PEGASUS LN:
• High efficiency thanks to the exchange surface of the elements in
• cast iron burner and innovative insulation of boiler
• rationality to simplify installation and maintenance
• On Battery certificate ISPESL
• Operates on LPG using a special conversion kit to be purchased
• when ordering

• DP STANDARD-boiler controlled by boiler and exhaust gas
• thermostat
• DP PROFI-boiler controlled by electronic regulator(higher
• comfort of attendance,possibility of boiler's output modulation).
• The wood gasifying boiler ATTACK DP is intended for econo-
• mical and ecological heating of dwelling houses,cottages,small
• ,lants, work stations,and similar objects.Prescribed fuel for
• ATTACK DP is dry fuel.At full usage of the fuel buffer there is
• a possibility of continual burning for 8-12 hours.