Thermo Design Total

• FLOOR STANDING HEAT GENERATOR HIGH EFFICIENCY
• UPPER 90% SUITABLE FOR LIQUID FUEL OR GAS HOT
• WATER PRODUCTION FOR CENTRAL HEATING
  
  

OUR STRONG POINTS:

• High efficiency floor-standing generator fitted for jet burners on
• liquid and/or gas fuel, with partial flame reversal and one flue
• pass, cooled combustion chamber, for the production of hot
•  water for central heating.
  - G20 cast-iron boiler body made from pre-assembled
• elements (2-8) with steel cone inserts and boiler studs, insulated
• by a layer of rock wool lined by special tear-proof material.
  - Steel casing painted by anaphoresis using epoxy powder paint
• and furnace-baked at 180°C.
  - Supplied as one single package in a wooden crate.
  - Design with elegant and refined appearance.
• ADVANTAGES OF THE GN1 N:
• - Sturdy exchanger with high thermal performance.
  - Path of the flue gas that allows simple and silent operation.
  - Cleaning and maintenance simplified by the possibility of
• accessing the boiler from the front.
  - Very high efficiency and consequently reduced consumption
•  and low operating costs.

• OUR STRONG POINTS:
• - High efficiency floor-standing heat generator fitted for jet
• burners on liquid and/or gas flue, with partial flame reversal
• and one flue pass, cooled combustion chamber, for the
• production of hot water for central heating and DHW.
  - Quick storage cylinder (100 litres), steel with cryolite glass
• finish, insulated by a layer of polyurethane foam, with
• immersed coil.
  - Pump for the storage cylinder coil and central heating pump.
  - G20 cast-iron boiler body made from pre-assembled
• elements with
•  steel cone inserts and boiler studs, insulated by a layer of
• rock wool lined by special tear-proof material.
  - Steel casing painted by anaphoresis using epoxy powder
• paint and furnace-baked at 180°C.
  - Supplied as one single package in a wooden crate.
  - Elegant and refined design.
• ADVANTAGES OF THE GN1K N:
• - Sturdy heat exchanger with high thermal performance that
• guarantees very high efficiency and consequently reduced
• consumption and low operating costs.
  - Cleaning and maintenance simplified by the possibility of
• accessing the boiler from the front.
  

• OUR STRONG POINTS:
• - High efficiency floor-standing generator fitted for jet burners
• on liquid and/or gas flue, with partial flame reversal and one
• flue pass, cooled combustion chamber, for the production of
• hot water for central heating.
  - G20 cast-iron boiler body made from pre-assembled
• elements (6-14) with steel cone inserts and boiler studs,
• insulated by a layer of rock wool lined by special tear-proof
• material.
  - Steel casing painted by anaphoresis using epoxy powder
• and furnace-baked at 180° C.
  - Supplied in 3 boxes:
  1-boiler body in a wooden crate
  2-casing packaged in a cardboard box
  3-instrument panel packaged in a cardboard box
  - Modern and elegant lines.
• ADVANTAGESOF THE GN2 N:
• - Path of the flue gas that allows simple and silent operation.
  - Cleaning and maintenance simplified by the possibility of
• accessing the boiler from the front.
  - Very high efficiency and consequently reduced consumption
• and low operating costs.
  - Fitted for two-stage burners.
  - Wired for control unit.

• OUR STRONG POINTS:
• - High efficiency generator on liquid or gas flue, with three
• flue passes, cooled combustion chamber, for the production of
• hot water for central heating, suitable for operation either
• connected to a traditional system or connected to a low
• temperature heating system, with a minimum return
• temperature of 35°C.
  - G20 cast-iron boiler body made up of elements to be
• assembled when installing the generator in the heating
• system.
  - Steel casing painted grey by anaphoresis using epoxy
• powder paint.
  - Modern and elegant lines.
• ADVANTAGES OF THE GN4 N:
• - High efficiency achieved by the combination of high
• technology and maximum constructional rationality.
  - Special layout of the cast-iron body, and additional
• attachment,that allows the boiler to be connected in two
• different ways,according to the traditional system or
• alternatively to a low temperature heating system.
  - Fitted for two-stage burners.
  - Wired for control unit.